A place for all things Radio Controlled
 
HomeFAQSearchRegisterLog in
Come sign up on the new forum ----- www.myrcguide.com

Share | 
 

 spare blades hbfp v2

View previous topic View next topic Go down 
AuthorMessage
Eddie NYC




PostSubject: spare blades hbfp v2   Mon Sep 07, 2009 11:14 am

ordered second set of factory but found the reinforced extreme blades on a store. they are great on my lama and I have not broken a set yet, are these a good investment for the hb as well? lama blades shattered on any impact. been happy with the extremes foe the lama.
Back to top Go down
P3tras

avatar


PostSubject: Re: spare blades hbfp v2   Mon Sep 07, 2009 11:19 am

I heard that xtreme fiber blades are stronger than stock blades on hb. But you may also consider carbon fiber blades Wink
Back to top Go down
Eddie NYC




PostSubject: Re: spare blades hbfp v2   Mon Sep 07, 2009 11:50 am

thanks, while you're on here, I assume that blades are less of an issue on the tail, is that right? Can you have extreme main blades and stock tail rotor blades?

Also, I burried a question in another thread about spare motors. Both hbfp v1 motors will work on v2 - especially - the tail, right? if I'm right nothing else on the tail fits from v1 except the motor and blades. also for sore motors, do moat people get stock or upgrade to the extreme motors? have them (extreme) on my lama v4 and seem pretty good.
Back to top Go down
P3tras

avatar


PostSubject: Re: spare blades hbfp v2   Mon Sep 07, 2009 3:16 pm

Yes, stock tail blades are good! You can use them with any main blades. All motors from V1 will work on V2. I think you should stick with stock motor, because extreme motor is prone to fry 4in1 which is the most expensive part. You might consider installing extreme DD tail motor if you will want more tail control. orange74
Back to top Go down
Sponsored content




PostSubject: Re: spare blades hbfp v2   

Back to top Go down
 
spare blades hbfp v2
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Table Tennis Shops in Shanghai
» Do you seal your blade?
» Why do people get so Obsessed with blades?
» FS : USED STIGA BLADES
» Professional Butterfly Blades Dealer (https://carousell.com/fastsg/)

Permissions in this forum:You cannot reply to topics in this forum
RC Guides Forums :: RC Helicopters :: 4ch FP and Co-Axial Helicopters-
Jump to: