A place for all things Radio Controlled
 
HomeFAQSearchRegisterLog in
Come sign up on the new forum ----- www.myrcguide.com

Share | 
 

 uhg help

View previous topic View next topic Go down 
AuthorMessage
Willy Green

avatar


PostSubject: uhg help   Thu Sep 24, 2009 8:55 pm

I have RC Exceed Mini spark, with upgraded Walkera parts. I just crashed it and now the led on the heli on the 4 channel micro receiver has a steady blink. I can't start the heli up now. Ive tried turning the remote off and unplugging the battery etc. Usually the led will start to rapidly blink when i turn the controller on then give a steady light, like other helis.
This is my first time with the 4 in 1 going wrong redface

THE HANDBOOK TEACHES NOTHING! noob
Back to top Go down
P3tras

avatar


PostSubject: Re: uhg help   Sat Sep 26, 2009 3:17 pm

Are throttle trim and stick on their lowest position? orange78
Back to top Go down
Willy Green

avatar


PostSubject: Re: uhg help   Sat Sep 26, 2009 10:43 pm

Yes they are, did all the basic checks, wires, everything is plugged into the 4 in 1 receiver.
Some guy on another forum said something could of burnt out on the receiver. Just seems weird after a light crash it stops working.
Im just trying to figure out what part to buy next. Receivers are like 30 bucks.....
If that's the next step then i need to figure out if the receiver will auto bind to my transmitter.
I think i have a RTF Transmitter with the mini spark.


i hate to say it but iam over this heli right now lol
Just bought 30 bucks of spare engines and skids etc and this happens grrrr atomic
Back to top Go down
P3tras

avatar


PostSubject: Re: uhg help   Sun Sep 27, 2009 11:16 am

Is it 2.4ghz version? If yes, try to bind 4in1 with tx again :prop:
Back to top Go down
Willy Green

avatar


PostSubject: Re: uhg help   Sun Sep 27, 2009 2:18 pm

its not 2.4 but RC
Back to top Go down
P3tras

avatar


PostSubject: Re: uhg help   Mon Sep 28, 2009 11:27 am

Try to remove and reinstall crystal on 4in1
Back to top Go down
Willy Green

avatar


PostSubject: Re: uhg help   Mon Sep 28, 2009 2:54 pm

i had the Transmitter on and removed and put the crystal back in. Still a steady green blink.
Back to top Go down
Sponsored content




PostSubject: Re: uhg help   

Back to top Go down
 
uhg help
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
RC Guides Forums :: RC Helicopters :: 4ch FP and Co-Axial Helicopters-
Jump to: