A place for all things Radio Controlled |
Come sign up on the new forum ----- www.myrcguide.com |
| | Spectrum/Blade 400 Rebind Problem | |
| | Author | Message |
---|
sjflyer1
| Subject: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 2:21 pm | |
| I did create a noob dilemma, maybe you guys have an idea on fix. I bound my HBK2 to the Spectrum Tx. But in my haste, I bound to model 1 or replaced the Blade 400. I rebound the Blade and went back to factory settings which I thought would bring it back to "out of the box settings" and flyable. However after powered up and gyro initialized the elev. is no where close to centered. Even sub trim has to go 100% to bring swash close to level. Ail is also way off. So before I start making adj on the linkage to lvl swash, any thoughts/suggestions? All settings are back to Factory and she was very flyable/lvl swash and shouldn't need such drastic linkage adjustments (?) | |
| | | Nuttcaze Admin
| Subject: Re: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 3:53 pm | |
| oh man that sucks, now you will need to go through and re-set up everything to make it fly properly. | |
| | | sjflyer1
| Subject: Re: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 5:07 pm | |
| ALL day long. I can have lvl swash, BUT my AIL, Elev and pitch servos are all reversed to correct stick control. Switch any or all servos and they just crank out 100%. I also realized after going back to the HBK2 that I have the same problem with it's settings, both models, same problem | |
| | | Fatdaddy
| Subject: spektrum Sat May 02, 2009 5:37 pm | |
| If /when you get to the point you wanna to throw it out the window, just call the spektrum people at Horizon Hobby. The number is on the back of the book. Anytime I've set stuff up and had the kind of problems you got,which is always!! servos going in the wrong direction and backwards all over the place and I mean wacked!!! I just call them and BAM less than 5 min. and its fixed. Ask for Chris, he is the best!!! Go right to the source!!!! It works for me and it saves sooooo much time and hair pulling. | |
| | | Nuttcaze Admin
| Subject: Re: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 7:05 pm | |
| - sjflyer1 wrote:
- ALL day long. I can have lvl swash, BUT my AIL, Elev and pitch servos are all reversed to correct stick control. Switch any or all servos and they just crank out 100%. I also realized after going back to the HBK2 that I have the same problem with it's settings, both models, same problem
You will have to go into your Tx setting and change it. When bind a new Rx over an existing model it erases all previous settings it had for the old Rx. I'm not sure what settings you used to set it back to but If you just re-bound the Blade Rx back to the original spot, then you will still have to go through the enitre set up process again. Because from the sounds of it your Tx setting are on default. | |
| | | Prel
| Subject: Re: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 7:23 pm | |
| This link would be a good place to start. No idea if this guy has any idea at all but got to give him some points for knowing how to use a vid. http://mysite.verizon.net/bizwptdb/id32.htmlOnly joking. Any advice from Nuttcaze is going to be good. Darrel | |
| | | Nuttcaze Admin
| Subject: Re: Spectrum/Blade 400 Rebind Problem Sat May 02, 2009 7:31 pm | |
| | |
| | | sjflyer1
| Subject: U THE MAN NUTTCAZE!!!!!! SUCCESS!!!!!!!!!!!!!!!!! Sat May 02, 2009 8:19 pm | |
| YUP, It was all in my Swash mix, had to go neg on all 3. Watched about every DX6i set up vid out there 'cept yours. They all show you how to set up, but only yours goes beyond and offers what to do in different situations. Us noob's would be lost without you, THANKYOU! | |
| | | Nuttcaze Admin
| Subject: Re: Spectrum/Blade 400 Rebind Problem Mon May 04, 2009 4:27 pm | |
| cool, thanks, I try to make all my vids basic and easy to understand because I get confused very easily so simple is better, lol. | |
| | | pevr
| | | | Sponsored content
| Subject: Re: Spectrum/Blade 400 Rebind Problem | |
| |
| | | | Spectrum/Blade 400 Rebind Problem | |
|
Similar topics | |
|
| Permissions in this forum: | You cannot reply to topics in this forum
| |
| |
| |
|