A place for all things Radio Controlled
 
HomeFAQSearchRegisterLog in
Come sign up on the new forum ----- www.myrcguide.com

Share | 
 

 Belt CP V2 Blade 400 main gear?

View previous topic View next topic Go down 
AuthorMessage
tjernstr0m

avatar


PostSubject: Belt CP V2 Blade 400 main gear?   Thu Oct 22, 2009 4:10 am

Yesterday i finily got my belt, so i opend the box looked at it for a while maybe 15 minutes or so, checked the setup, installed the anti crash kit "training gear" and walked away to the garage 4 a first test hover with a CP heli ever, was happy and excited like never before, but it dident last long orange43 i dident even lift the belt of the ground befor i stripped the main gear and now i know that i need a new main gear orange58

So to the question i heard that i can use a blade 400 main gear?
and to another question am i going 4 the one with the oneway bearing installed or the one without the oneway bearing?
Back to top Go down
pinguin6218

avatar


PostSubject: Re: Belt CP V2 Blade 400 main gear?   Thu Oct 22, 2009 9:33 am

tjernstom, nice avatar you have.

Also I have question for others, do the main gear of v2 the same of v1? I need to buy one for v2, but cannot find one with oneway bearing installed in v2 parts list. I see one on v1 parts list.
In v2 parts list, they sell in pair, top and bottom gear, and the oneway bearing un install.

:prop:
Back to top Go down
keithldick

avatar


PostSubject: Re: Belt CP V2 Blade 400 main gear?   Thu Oct 22, 2009 11:54 am

I've been told you *Can* use the Blade 400 main gear with the Belt CP...

pinguin6218, check here for the *Original Esky Gear*: SlickZero...

This gear should also work: Heli-Max MX400

Here's a *Wiki* for the Belt CP with known issues and other info... Esky Belt CP
Back to top Go down
tjernstr0m

avatar


PostSubject: Re: Belt CP V2 Blade 400 main gear?   Thu Oct 22, 2009 5:01 pm

P hehe thanks, hope i learn to do that stuff one day to :) i think that the belt series with 1 and 2 is just series with mostly the same parts and upgraded parts in the later models in the serie, in some hobby shops they show that they have parts 4 both but havent seen any specific gear 4 the V1 or V2. But check it out a bit better, i don't know if its right but thats what i think.



K ok, sounds good, do you know if the OWB is the same as on the belt, so i dont get one with a OWB and end up with it lieing in a box or so? :)



if someone else know, tell me so i can get a propper gear :)
Back to top Go down
garytash

avatar


PostSubject: Re: Belt CP V2 Blade 400 main gear?   Sun Oct 25, 2009 11:25 am

I have both a Belt CP V2 and a Blade 400. Yes, the gear is the same. I have bought a lot of the Blade 400 gears at my LHS and used them on both helis.
Back to top Go down
tjernstr0m

avatar


PostSubject: Re: Belt CP V2 Blade 400 main gear?   Mon Oct 26, 2009 6:12 am

garytash thanks now are my gear on the way :D
Back to top Go down
Sponsored content




PostSubject: Re: Belt CP V2 Blade 400 main gear?   

Back to top Go down
 
Belt CP V2 Blade 400 main gear?
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» New Main Line Riders out now
» Brian Blade Blue Note
» Brian Blade singing
» Do you seal your blade?
» MAMI'S GEAR

Permissions in this forum:You cannot reply to topics in this forum
RC Guides Forums :: RC Helicopters :: 6ch Collective Pitch Helicopters-
Jump to: