Tx 0406A / HBK2 When the throttle stick is all the way down ( 0 power ) there is still some power going to the motor. 2 to 3 clicks up and the power stops and all is quite (servo's stop chattering and electric whine stops) A couple of clicks more upward and the power is on and all is good. Then there is a dead spot again at about 30 to 40% stick, once you get past that spot the throttle works fine up to 100% Is there an easy fix for this problem? This a new king2 that has " 0 " crashes. Any advise would be appreciated.