The Nuttcaze and Radd way..

Hi guys.
I have learned to fly i circles and around with the 4ch Lama3 and wanted to try Cp (collect pitch=6ch)
I borght an older Belt Cp that has been opgraded with all alu/carbon
and a EK2-0704A gyro after a chrash.
The owner could not make fly again and gave up.
Then i watched all the Belt Cp videos by Nutttcaze
and took it apart and started all over again cheking everything he teached me and allso found out
what had gone wrong for the guy who had it before me.
The crystal in the reciver was dead. A faulty servo due to tight links set up wrong.
Everything needed to be set up again and after a while i found that the tail rotor was rotating the wrong way.. just to mention some of it...
Finally got it right.. at least within the limits.. and went on from Nuttcaze videos to Radd :

http://www.dream-models.com/eco/flying-index.html

The fact is that if you do as he says.. that means... DO AS HE SAYS AND NOTHING ELSE..
then the program is working !!
On the 10th battery i did my first hover and i have not chrashed yet even after 20+ sessions.

The guy i borght it from was surprised and asked how...
I smiled at him and said.. NUTTCAZE

Thanks