CNC Head and Tail parts for Belt CP v2

Has anyone here bought any CNC Head and Tail kits from the Hong Kong sellers on eBay?

How are the parts?

What, if any, other parts did you need to order or upgrade in order to make the new metal parts work? I thought I had read somewhere that the diameter of the feathering shafts are different, or the main shaft, or somthing like that.

I am considering this upgrade soon (soon as I get paid, right?) and was just wondering.

Thanks!

don't waste your time or money with esky cc parts get this head its a clone t-rex 450 head and fits on the belt cp v1 and v2

http://www.ehirobo.com/shop/product_info.php?cPath=173_175&products_id=6308

Those CopterX parts will mate up with the Belt CP v2 main shaft and servo points OK?

Are any other components needed to make it work with the Belt? Flybar the same diameter, feathering shaft included?

Thanks!

yup all good search copter x on the forum theres a whole section talking about this head for a belt cp

but if you change to that head you will be unable to use all belt parts like mainshaft or flybar, mmm dont remember what else but this was the main cause i didnt bought it ( i had many spare parts from ESKY :S

fly bars on the 450 are all the same basicly u can u any flybar on ne heli and as for the main shaft i think u can use them on the copter x head but not postive

what about feathering shaft???

look at my CNC head and tail rotors, both from ebay form r711.com

look my beauty :P






at least its not that ugly purple one ^^

this is the link http://www.rc711.com/shop/product_info.php?products_id=1084

Aha I've been looking for a good (inexpensive) head, I realise the 2 words do not normally go together, but the Cp is in the Airwolf body and I do not want the purple/blue cnc head and now I have a Trex I'm not willing to spend loads of money on the Belt CP so this mayb exatly what I was looking for.

Pittnuma wrote:

Aha I've been looking for a good (inexpensive) head, I realise the 2 words do not normally go together, but the Cp is in the Airwolf body and I do not want the purple/blue cnc head and now I have a Trex I'm not willing to spend loads of money on the Belt CP so this mayb exatly what I was looking for.

WHA??? Airwolf body?? I ain't seen no Airwolf body. How about puttin some pics up on the Scale heli forum.

Git er duuuunn!

Donnie D

Hey now wait a minute!!!! I like the purple/pink ESKY !!!!LOL The big problems with the purple ESKY parts are that they are soft! And they are hard to keep in tune..NOT hard TO tune but they don't stay in tune!!
Otherwise they work very nicely.. The one that eltoffer posted pix of are ESKY design too.. Look at cnchelicopter.com....
They have a very nice slection of heads from reasonable price to expensive.. I've just ordered a set of the copter X "Black Angel" cnc head and tail for a heli I'm buildin, they are ,I guess, their top line stuff and I'm very anxious to see them..
Anyway the ESKY stuff works really well and are good to learn with cause you got to work on them a lot.. if you go with them just remember to be careful about stripping screw holes and stuff gettin bent..

what about upgrading the servos if putting on a cnc head/tail....the servos on my belt have gotten sloppy.

i just put my exi head on my belt cp v2 and its awesome sooo smooth i can actully control it better i just got to use the stock swash plate to make it work.