Belt cp v2 (what did i do wrong that i only have 8 Degees +- WANT 10 or 12 degrees

What did i do wrong if i got 8 degees + - on my head how do i get it up to at least 10 degees + -

right now i got my dx7 swash menue at all 65%

i can't fig out why i can't get a higher degree number it flys good now but i want more response when i give it pitch up and down to slow for me



i set my dx7 swash menue at all 65% got all my arms alll level at mid stick in idle up and all i get is 8 + - i got 12 + - on my copter x with no problem using all the same setting in the dx7 for copter x and belt cp and copter x gets 12 and belt cp only gets 8 what am i missing?

.............the way its setup now for the 8 degrees is far as i can get the swash is soooooo low can't go anymore so what should i do?

Have you tried increasing you pitch travel adjust and also increase the swash mix on the pitch. Try the swash mix a bit first.

Should help and is easy to set back.

Donnie D

ok i adjusted my swash menu and got at high ar 71 % on pitch but that didn't really do anything maybea half degee......what u me pitch travel adjustment?

On my DX6i it is called travel adjust, and it will increase or decrease the throw of your servos.

Donnie D

--------------------------------------------------------------------------------

i figured it out im using a exi metal head from my exi transpro zl and a belt cp main shaft with that and its to short so i can only get 8 + - or do something like 12 + and 4 - or (10+ and 6-) 11+ & -6 thats it.....ne body know how to make an exi head work on a belt cp v2??