Tail problem

Subject: Tail problem Wed Sep 16, 2009 5:14 am

Hi there.
Flown around with my 4ch Lama3 for allmost a year now and just got my hands on a
Belt Cp. It´s the V1 with all alu+esky headlock gyro opgrade.
So far i have done the setup of the swashplate but when i came to the tail i got stuck.
To make the Tail blade control arm move free all the way i need to loosend the
Connector of tail blade arms 2 full turns cause the 1/2 turn it
says in the manual is not enough orange78

Now i am afraid that the schrews will fall out but it becomes really tight the last 1/3 of the way towards the boom if i don´t do that.
I have the same problem with both the standard plastic and the alu opgrade !?
What am i doing wrong orange80

Thanks for a great heli forum !

Jorn

Subject: Re: Tail problem Thu Sep 17, 2009 10:06 am

Well.. found out that the Tail Blade Control Arm from the Twister storm has an extra link on it and it will fit on nicely.

Now it´s running smooth all the way on the tail shaft orange72

Hi jorn

Subject: Re: Tail problem Thu Sep 17, 2009 12:08 pm

Glad that it worked out! :bigthumb: