Blue Ray 450se - CNC upgrades on xHeli - multiple part #s

Just a note for Blue Ray 450se/pe owners

On the xHeli site they are curretnly listing 4 different part numbers for the full CNC head assembly

http://www.xheli.com/blueray450.html

The 18H-MM0029 has a shaft that is 108mm long, the stock shaft on the BR 450se is 115mm. At 108mm, it can't connect up to the drive gear for the rotors.

18H-MM0029 - has a 108mm long shaft
18H-M0099 - ?
18H-M0629 - ?
18H-M0699 - ?

I'm waiting to hear from support what the differences are in these part #s, and which one has a 115mm shaft?

So, just know that the 18H-MM0029 does not appear to have the correct shaft length for your BR. Can't speak to the others.

Regards,

Tristar

the xheli support is gonna tell you the only difference is the color, but there are several difference. are you trying to find a CNC head set for your Blueray?

Yes,

For now they are sending me replacement shafts, but I can't tell from the pictures what the differences are, they all look too much alike. Also want others to know what I ran into.

Inputs more than welcome.

Tristar

The BlueRay should use the MM0029 headset, It didn't work on yours?

That is correct

The 18H-MM0029 has a shaft that is 108mm long, the stock shaft on the BR 450se is 115mm. At 108mm, it can't connect up to the drive gear for the rotors.

Doesn't work unless you use your own stock or replacement 115mm shaft, I used my original shaft, the 108mm shaft is useless.