HBK II/belt cp v2 battery/stuffs

hi all,
i am going to change my future HBK II motor to a burshless esky 3100 or 3900 motor.
what battery should i use? pls choose from this list http://www.rc711.com/shop/index.php?cPath=30
and wil a long/big battery fit in the battery holder?
if the battery is a JST can i also use a convert cable instead of soldering?
like this one http://www.rc711.com/shop/product_info.php?cPath=30&products_id=648
and this http://www.rc711.com/shop/product_info.php?cPath=30&products_id=1633

go for either the 1500mAh or the 1800mAh 11.1v Lipo.

When you change motors you will need to buy a new ESC for the motor and that will prob have a deans connector already.

I just bought a Volcano 30A ESC and it works great with a E-sky 3900kv brushless. With most ESC's the male Deans and female bullet connector come soldered and heat shrunk on, but you will probly have to solder a female Deans connector on your batteries. Also depending on your motor you will have to solder the male bullet connectors to the 3 motor wires, don't forget to use heat shrink! Soldering is pretty much a must if you wanna upgrade anything r/c. [url]



Got the motor and ESC here for a good price: http://www.hobbypartz.com/30a-electronic-brushless-esc-speed-controller--volcano-series-.html[/url]



Check this out for Volcano ESC programming help. https://www.youtube.com/watch?v=G7pqcArjqfk

I think this will be best from rc711: http://www.rc711.com/shop/product_info.php?cPath=30&products_id=462

oh ty guys
but if the battery is a JST and the ESC is a deans (T) then can i also use a converter cable to convert the battery JST into the deans? i ask it cuz maybe strong battery will burn the cable or something xD

You can use the converter, but it will be best to re-solder it But the 1500mah battery I posted is already with deans

oh ok then i am going to but that battery.
then i go for the converter and a deans connector set for my stock battery
http://www.rc711.com/shop/product_info.php?cPath=30&products_id=783
is this one good?

I think it should be good

and nuttcaze..
the 25A ESC from hobbywing won't catch fire on a HBK II with 3900 motor?
or should i better use the EMAX 35A?

I think you will be fine with the 25A HW. For the connectors I'd cut off the JST and solder on the deans ultra's

reaz wrote:

and nuttcaze..
the 25A ESC from hobbywing won't catch fire on a HBK II with 3900 motor?
or should i better use the EMAX 35A?

the Hobbywing will be fine

oh ok ty
so if have JST connectors what means i need to solder or use a converter?

hey another question
so what i understand is that the king 3 have some same parts as the belt cp v2.. is that with ALL parts of the king 3?
cuz rc711 has discontinued HBK II

I'm pretty sure there were only 3 or 4 changes to the HBK V3 over the HBK II, but the different parts should be easy to swap out then you'd basically have a HBK V3. But I have never seen the HBK V3 in person so I'm not 100% certain.

hey, now they don't have the HBK II i am going for the HBK 3, but what ESC should i now use on the HBK 3? the 25A hw or the 40A?

I think you shouldn't waste your money and use stock ESC. It is pretty good. And king 3 already comes with brushless motor

i want those cuz they are programable and i only go 1 time in 2 years
so what do you guys recommed

25A will be good. But don't forget rc711 ships worldwide I bought my belt cp from them, but I live in Lithuania

hehe i know, but my mother don't want to ship
so i need to wait 2 years or find a shop in EU that can pay with bank depreciation

What about www.heliguy.com ? It is in UK

do they also accept bank depreciation?