| Honey bee FP vibration issue | |
|
|
Author | Message |
---|
eris19xx
| Subject: Honey bee FP vibration issue Sat Aug 22, 2009 5:32 pm | |
| Hi I have a big problem with my Honey bee FP ,because there are too many vibration due to the training kit I cannot fly well. Actually my confidence and hovering skill are not enought to let me take out the training kit. Furthermore I need some suggestion how to eliminate or reduce the vibration.By the way this is my training kit Thanks all for your help | |
|
| |
Donnie D
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 5:41 pm | |
| If you have a smooth surface to pracitce over (hardwood,vinyl,etc floor--concrete, asphalt-- smoothe dirt, etc) not carpet, you can remove the balls from the training kit and that will help a lot. The training kit will not cause the vibration, but it will magnify it. Donnie D | |
|
| |
247rememberme
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 5:53 pm | |
| it`s probably not the training gear but something else. it`s absolutely CRITICAL the blades are balanced,the fly-bar positioned correctly and the fly-bar paddles set correctly. if you`re not sure if they are/aren`t let us know and i`m sure somone in here can explain/show what`s wrong | |
|
| |
eris19xx
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 7:01 pm | |
| | |
|
| |
P3tras
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 7:08 pm | |
| One problem is that you put tape (right?) on one paddle. This makes it more heavy than the other paddle and the heli is more unstable. Put tabe on both paddles, or just remove it and paint the flybar if you want | |
|
| |
247rememberme
| |
| |
eris19xx
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 8:03 pm | |
| No tape I followed the instruction from nuttcaze .The red and pink color it is paint. My hovering is still in the beginning because I can hover well only from the back .Lateral and front hovering are still a disaster.... I will do some check up tomorrow and we will see if I can find the problem... | |
|
| |
247rememberme
| Subject: Re: Honey bee FP vibration issue Sat Aug 22, 2009 8:11 pm | |
| to hover from the BACK is the only way whilst learning | |
|
| |
eris19xx
| Subject: Re: Honey bee FP vibration issue Sun Aug 23, 2009 4:57 am | |
| I did a total check up today and: the blades are balanced not at 100% I put some tapes and let´s see the fly-bar positioned correctly still to be done because I don´t know how to do it( I cnnot move the fly-bar) fly-bar paddles set correctly I adjusted a bit there is a bit of wind today, nevertheless I will try to | |
|
| |
247rememberme
| Subject: Re: Honey bee FP vibration issue Sun Aug 23, 2009 7:09 am | |
| if you look in the video section of this forum you`ll see nuttz`s guides to setting up the hbfp. i think they are for the new version of the `Bee`but it also applies to the old version. you`ll see all about setting the blades,paddles,fly-bar etc. | |
|
| |
davesheli
| Subject: Re: Honey bee FP vibration issue Sun Aug 23, 2009 10:18 am | |
| | |
|
| |
eris19xx
| |
| |
Donnie D
| Subject: Re: Honey bee FP vibration issue Mon Aug 24, 2009 10:34 pm | |
| No you don't. Keep it mostly stock. Trust me, if you go with a bigger motor, you're gonna need to change something else, which will lead to something else,etc,etc. Use it as a great trainer, and then when you feel ready, move on to a larger CP heli. Donnie D | |
|
| |
Sponsored content
| Subject: Re: Honey bee FP vibration issue | |
| |
|
| |
| Honey bee FP vibration issue | |
|